Menu
Your Cart

ZG-90 SILVER 500ML ZINC GALVANISED SPRAY COLD ZINC RAPID DRY

ZG-90 SILVER 500ML ZINC GALVANISED SPRAY COLD ZINC RAPID DRY
New
ZG-90 SILVER 500ML ZINC GALVANISED SPRAY COLD ZINC RAPID DRY
ZG-90 - Cold Zinc Galvanising Paint
Rapid dry galvanise

500ml Spray - SILVER BRIGHT FINISH

ZG-90 is the fast and effective way to touch up galvanised structures. ZG-90 cold zinc galvanise is a zinc-rich paint that provides a combination of rapid drying time, superior coverage, opacity, and protection against corrosion.

It is an accurate colour match for newly galvanised steel and is ideal for protecting welding joints and cut ends.

Application:
 

Fastener specialists: use to protect bolted joints on steel sections and girders. Avoid the need to re-plate a bolt or stud, spray ZG-90 on exposed bolts and threaded bar to match existing zinc plating or galvanised coating.

General fabrication: use on bare, degreased metal to provide an effective finish with good long-term protection.

Facility Maintenance: use for repairing and maintaining fences, metal sheets, air conditioning units and ducting.

Electrical and mechanical contractors: spray ZG-90 on cut ends of Unistrut type channelling and cable conduit.

Key Features

  • Rapid drying time: Touch dry in 2 mins/Hard dry in 20 mins at 20°C.
  • Excellent colour-match for freshly hot-dip
  • Effective protection against corrosion
  • Excellent substrate adhesion and flexibility
  • Crossrail approval #CRL-MCR-004850
  • Non-conductive
  • RAL referenced colour matches available: Black, Red, Blue, Green, White, and Yellow
Application

Fastener specialists: use to protect bolted joints on steel sections and girders. Avoid the need to re-plate a bolt or stud, spray ZG-90 on exposed bolts and threaded bar to match existing zinc plating or galvanised coating.

General fabrication: use on bare, degreased metal to provide an effective finish with good long-term protection.

Facility Maintenance: use for repairing and maintaining fences, metal sheets, air conditioning units and ducting.

Electrical and mechanical contractors: spray ZG-90 on cut ends of Unistrut type channelling and cable conduit.

Directions for use
  • Use in well ventilated area.
  • Remove any rust and scale with a wire brush. Ensure that the surface to be coated is clean, dry and free from grease.
  • ZG-90 contains solids which settle during storage. Aerosol: shake the can vigorously until the agitator ball is free and continue shaking for a further minute. Tin: Carefully stir the paint until solvent and solids are thoroughly mixed.
  • Shake/stir periodically during application.
  • Apply in light, even coats - best results are obtained with 2 - 3 light coats rather than one heavy coat.
  • Additional coats can be applied after 15 - 20 minutes.
  • When finished: clear the aerosol valve by briefly spraying the can upside down. When using the tin, firmly reseal it. Clean brushes with White Spirit.
  • Do not use on the inside of water storage tanks.
  • Remove prior to welding.

Technical Data:

Description Spec
APPEARANCE Silver/zinc colour matched to newly galvanised metal (approximately RAL 6005)
ODOUR Solvent
CORROSION PROTECTION (ISO 12944-2) Category C3
MAXIMUM TEMPERATURE RESISTANCE OF CURED FILM 150°C
COATING THICKNESS (1-PASS, AEROSOL) 30 µM
ANTI-CORROSION PERFORMANCE (ISO 12944-2) Pass: Category C3
TOUCH DRY 2 mins @ 20°C
HARD DRY 20 mins @ 20°C
PURITY OF ZINC PIGMENT >99%
ZINC CONTENT IN CURED FILM >80%
HEAT RESISTANCE (4 Hours) 200°C
LOW TEMPERATURE RESISTANCE -30°C
SALT SPRAY RESISTANCE (ASTM B117) 350 hours (40 µm film thickness)
PRODUCT SIZE 500ml Aerosol
MANUFACTURER CODE 1785

The complete range with codes

Product Code Manuf Code Size
CAN32811 1785 500ml Spray - SILVER BRIGHT FINISH
CAN32813 1935 500ml Spray - Satin Finish BLACK RAL 9005
CAN32817 1936 500ml Spray - Satin Finish WHITE RAL 9010
CAN32814 1937 500ml Spray - Satin Finish GREEN RAL 6010
CAN32819 1938 500ml Spray - Satin Finish RED RAL 3000
CAN32818 1939 500ml Spray - Satin Finish BLUE RAL 5012
CAN32820 2045 500ml Spray - Satin Finish YELLOW RAL 1004
CAN33205 2018 900ml Tin - Silver
CAN33206 2026 900ml Tin - Satin Finish Black RAL 9005

Storage and Shelf Life

The aerosol product may be stored at normal ambient temperatures and has a shelf life of not less than 48 months with correct storage. Aerosols should always be stored below 50°C, away from direct heat and naked flame.

The tin/bulk version may be stored at normal ambient temperatures and has a shelf life of not less than 48 months with correct storage. It should always be stored below 50°C, away from direct heat and naked flame.

MP-90 Moisture Protection Corrosion Inhibitor Fluid

Download the manual or user guide

Product Safety Data Sheets (SDS) - ZG-90 AEROSOL SILVER:  Download
Product Safety Data Sheets (SDS) - ZG-90 AEROSOL COLOURS SATIN FINISH: Download
Product Safety Data Sheets (SDS) - ZG-90 BRUSHING SILVER: Download
Product Safety Data Sheets (SDS) - ZG-90 BRUSHING BLACK: Download
Product Technical Data Sheets (TDS) - ZG-90 SILVER: Download
Product Technical Data Sheets (TDS) - ZG-90 COLOURS: Download

Download the Product Leaflet:    Download

Write a review

Note: HTML is not translated!
Bad Good
  • Stock: In Stock
  • Model: CAN32811
  • Weight: 0.48kg
  • Dimensions: 76.00cm x 74.00cm x 74.00cm
  • SKU: CAN32811
  • UPC: 5012117010112
0 samples sold
R 242.65
Ex Tax: R 211.00